Home > Thermal Spray Wire >

Alloy C-276 Thermal Spray Wire Hrc 35 Typical Hardness 7000 Psi Bond Strength

Product Categories

Ohmalloy Material Co.,Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Alloy C-276 Thermal Spray Wire Hrc 35 Typical Hardness 7000 Psi Bond Strength

Name: Alloy C276 Thermal Spray Wire Hrc 35 Typical Hardness 7000 Psi Bond Strength
Brand: OHMALLOY
Price: 1 USD

Alloy C-276 Thermal Spray Wire Hrc 35 Typical Hardness 7000 Psi Bond Strength Manufactures

Brand Name : OHMALLOY

Model Number : Alloy C276

Certification : ISO

Place of Origin : China(Shanghai)

MOQ : 15kg/spool

Price : negotiable

Payment Terms : L/C, T/T,

Supply Ability : 50000KG/MONTH

Delivery Time : 7-20 DAYS

Packaging Details : 15KG/SPOOL

Material : Alloy C276

Diameter : 1.6mm,2.0mm

Package : 15kg/spool

Application : Pump casings

Spraying way : arc spraying

Typical Hardness : HRC 35

Bond Strength : 7000 psi

Deposit Efficiency : 70%

Contact Now

Alloy C-276 Thermal Spray Wire Hrc 35 Typical Hardness 7000 Psi Bond Strength

PRODUCT OVERVIEW

Alloy C-276 is a high purity nickel-chrome-moly-tungsten (Alloy C-276) wire specifically designed for arc spraying. It produces dense, well-bonded coatings with good resistance to corrosion, and stress cracking in caustic, acidic and chloride mediums. It’s high hardness makes it very resistant to abrasion and metal wear.

TYPICAL DEPOSIT CHARACTERISTICS:

Þ Typical Hardness: HRC 35

Þ Bond Strength: 7000 psi

Þ Deposit Rate: 10 lbs/hr/100A

Þ Deposit Efficiency 70%

Þ Wire Coverage: 0.8 oz/ft² / mil

Þ Surface Texture * Variable

* Depends on air pressure used

SURFACE PREPARATION

Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.

Recommended method of preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.

APPLICATION

Þ Corrosion resistance

Þ Pump casings

Þ valves

SPECIFICATION

Alloy C-276

NOMINAL CHEMICAL COMPOSITION (wt%)

Ni	Cr	Mo	Fe	W
60.0	15.0	16.0	5.0	4.0

RECOMMENDED SPRAY PARAMETERS:

Diameter	Air Pressure	Voltage	Amperage	Standoff
1/16” (1.6mm)	*50-60 psi	*29-32	*100-300	*3-8 in (8-20 cm)

STANDARD SIZES & PACKAGING:

Diameter	Packaging
1/16” (1.6mm)	15kg/spool

Alloy C-276 Thermal Spray Wire Hrc 35 Typical Hardness 7000 Psi Bond Strength

Product Tags:

Metal Wire

Alloy Wire

Alloy C-276 Thermal Spray Wire Hrc 35 Typical Hardness 7000 Psi Bond Strength Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Ohmalloy Material Co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!